Assembléon

MC-1

Putting more value into flexibility

Based on the MG-1R, the MC-1 incorporates a significant improvement package, bringing you improved reliability and enhanced maintainability. Flexibility and easy of use is lifted to a new level with the new intelligent electrical feeder, accompanied by default installed tape cutters, which allows the system to pack up to 126 feeders. An optional new nozzle set allows even more tighted interspacing of down to 100 microns.

The new MC-1 combines a high-mix capability with accurate chip and IC shooting, making it the most versatile Pick & Place machines available. It meets a wide range of production needs by being able to handle a broad component mix.

Specifications
Maximum output per hour 24k
IPC 9850 output per hour 14.1k
Placement accuracy at 3 sigma 50 micron for chips, 30 micron for QFP
Component range 01005 to 100x45mm
(3.94 x 1.77")
Maximum component height 15mm (0.60")
Programmable placement force not applicable
Maximum board size (L x W)
Standard: 700 x 460mm
(27.55 x 18.11")
Optional: 700 x 510mm
(27.55 x 20")
Minimum board size (L x W) 50 x 50mm (2x2")
Board thickness 0.4 to 4mm
(0.015 to 0.157")
Automatic tool bit exchange nozzles
Tape feeding positions (8mm) 126
Feeder options tape, stick, tray, tape strips, tube, re-use, waffle pack
Footprint (L x W) incl. front side feeder trolleys 1650 x 1562mm (64.96 x 61.50")